Alam Industries

A PP (Polypropylene) fabricated tank is a type of storage or containment vessel designed for the safe storage and handling of a wide range of corrosive or aggressive chemicals and liquids. These tanks are constructed using polypropylene material, which offers excellent chemical resistance, durability, and the ability to withstand harsh environments. 

Basic Details:

• Material: The primary construction material of a PP fabricated tank is polypropylene (PP). PP is chosen for its exceptional corrosion resistance, chemical inertness, and durability, making it suitable for storing a variety of corrosive chemicals.
• Fabrication Method: PP fabricated tanks are typically constructed by welding PP sheets together to create a seamless structure. Welding methods such as butt fusion, extrusion welding, or hot gas welding are commonly used.
• Applications: PP fabricated tanks find applications in various industries, including chemical processing, water treatment, electroplating, metal finishing, semiconductor manufacturing, and more, where chemical storage and containment are required.

Specifications/Additional Details:

• Tank Capacity: PP fabricated tanks come in a range of sizes and capacities, from small laboratory tanks to large industrial storage tanks. The tank capacity is specified in liters or gallons.
• Tank Shape: Tanks can be fabricated in various shapes, including cylindrical, rectangular, conical, or custom shapes to fit specific installation requirements.
• Tank Wall Thickness: The thickness of the PP walls is determined based on the tank's intended use and the type of chemicals to be stored.
• Fittings and Accessories: PP tanks can be customized with various fittings, such as inlet/outlet connections, drain valves, level indicators, vents, and overflow ports, to meet specific requirements.
• Lining: In some cases, PP tanks may have additional linings or coatings for added protection against aggressive chemicals.
• Temperature Range: PP tanks can withstand a range of temperatures, but it's important to check the specific temperature range to ensure suitability for the intended application.
• Chemical Compatibility: Polypropylene is known for its broad chemical compatibility, but it's essential to verify compatibility with the specific chemicals to be stored.
• Strength and Structural Integrity: PP fabricated tanks are designed to provide structural integrity and resistance to mechanical stress, including wind and seismic loads, as needed.
• Pressure Rating: Some PP tanks may be designed to handle pressure, especially in applications involving chemical reactions or pressurized systems.
• Quality Standards: Ensure that the tank meets industry-specific quality and safety standards, particularly when used with hazardous chemicals.
• Access and Maintenance: Consider ease of access for inspection, cleaning, and maintenance. Some tanks may include manholes or hatches for this purpose.
• Customization: Manufacturers often offer customization options for PP fabricated tanks, allowing you to specify dimensions, fittings, and other features to meet your specific storage needs.
• Cost: The cost of a PP fabricated tank can vary depending on its size, specifications, and customizations.

Polypropylene (PP) chemical tanks are specialized containers designed for the storage and handling of various corrosive and hazardous chemicals. PP is chosen as the primary construction material due to its excellent chemical resistance and durability. 

Basic Details:

• Material: PP is the primary construction material for these chemical tanks. PP is highly resistant to a wide range of chemicals, making it suitable for storing corrosive substances.
• Tank Types: PP chemical tanks come in various types, including vertical storage tanks, horizontal tanks, conical tanks, cylindrical tanks, and more, each designed for specific applications.
• Applications: PP chemical tanks are used across multiple industries, including chemical processing, water treatment, pharmaceuticals, and more, wherever there is a need for chemical storage.

Specifications/Additional Details:

• Capacity: PP chemical tanks are available in a wide range of capacities, from small containers to large tanks with capacities exceeding 10,000 gallons or more. The capacity is chosen based on the specific storage needs.
• Tank Shape: The shape of the tank (e.g., cylindrical, conical, rectangular) can vary depending on the application and space constraints.
• Tank Design: PP chemical tanks may have features like conical bottoms for easy drainage, venting systems to release gas pressure, and hinged lids for access.
• Temperature Resistance: PP chemical tanks can handle a wide range of temperatures, but the specific temperature range should be checked to ensure suitability for your application.
• Fittings and Accessories: Tanks may come with various fittings, such as bulkhead fittings, drains, and overflow ports, to facilitate chemical handling and maintenance.
• Lining: Some tanks may have an internal lining or coating for added protection against specific chemicals or to extend the tank's lifespan.
• Reinforcements: Large PP chemical tanks may have reinforcements or support structures to ensure structural integrity.
• Color: PP tanks are typically available in natural white or black, but custom colors may be available upon request.
• Quality Standards: Ensure that the tank meets industry-specific quality and safety standards, especially when used for storing hazardous or regulated chemicals.
• Maintenance: Consider ease of maintenance, cleaning, and inspection. Some tanks may have access ports or manways for easy access to the interior.
• Customization: Manufacturers often offer customization options for PP chemical tanks, allowing you to specify dimensions, accessories, and features to meet your specific storage requirements.
• Cost: The cost of PP chemical tanks can vary significantly based on their size, specifications, and customizations.

A hard chrome plating tank is a specialized industrial tank used for the electroplating process, which deposits a layer of hard chromium onto a metal surface. This process is commonly used for improving the corrosion resistance, wear resistance, and appearance of metal parts. 

Basic Details:

• Purpose: Hard chrome plating tanks are designed for the electroplating process, specifically for depositing a layer of hard chromium onto metal substrates. This process is used to improve the surface properties of various metal components.
• Material: The construction material of the tank is typically a corrosion-resistant material like stainless steel or plastic, chosen to withstand the corrosive chemicals used in the plating process.
• Chemicals: Hard chrome plating tanks contain various chemicals, including chromium plating solution, which consists of chromium trioxide (CrO3) and sulfuric acid (H2SO4).
• Process: The electroplating process involves immersing the metal part to be plated into the tank filled with the plating solution. An electrical current is then applied to initiate the deposition of chromium onto the metal surface.

Specifications/Additional Details:

• Tank Size: The size of a hard chrome plating tank can vary significantly, from small tanks suitable for small components to large tanks for larger parts. The tank size is determined by the dimensions of the parts to be plated.
• Temperature Control: Temperature control is critical in the plating process. Tanks may include temperature control systems, such as heaters and thermostats, to maintain the plating solution at the desired temperature.
• Agitation: Some tanks include agitation systems to ensure even distribution of the plating solution and uniform plating on the metal parts.
• Exhaust and Ventilation: Proper exhaust and ventilation systems are essential to remove fumes and gases produced during the plating process. This is crucial for worker safety and maintaining air quality in the workplace.
• Tank Lining: Depending on the material of construction, tanks may have internal linings or coatings to enhance chemical resistance and prevent contamination of the plating solution.
• Power Supply: An electrical power supply is required for the electroplating process. Tanks are equipped with electrical connections for the electrodes used in the plating process.
• Safety Features: Safety features such as emergency shutdown systems, spill containment measures, and protective barriers may be included to ensure the safe operation of the plating tank.
• Quality Control: Quality control measures, such as monitoring and control of plating solution parameters, are often incorporated to ensure consistent and high-quality plating results.
• Maintenance: Proper maintenance of the tank and plating solution is crucial to ensure the longevity and efficiency of the plating process.
• Compliance: Hard chrome plating tanks and processes may be subject to regulatory requirements and environmental standards. Compliance with these regulations is essential.
• Cost: The cost of a hard chrome plating tank depends on factors such as size, material of construction, features, and customization options.

Bright anodizing tanks are specialized equipment used in the anodizing process to create a shiny or reflective surface finish on aluminum and other metals. The bright anodizing process involves creating a visually appealing, reflective, and corrosion-resistant surface on metal parts. Here are some basic details, specifications, and additional information about bright anodizing tanks:
**Basic Details:**
1. **Anodizing Process:** Bright anodizing is a type of electrochemical process that involves immersing metal parts, typically aluminum, in an electrolytic solution (usually sulfuric acid) and applying an electric current to create a controlled oxide layer on the surface of the metal.
2. **Tank Construction:** Bright anodizing tanks are typically made of materials that are resistant to the corrosive nature of the anodizing electrolyte. Common tank materials include polypropylene (PP), polyvinyl chloride (PVC), or stainless steel.
3. **Applications:** Bright anodizing is used to enhance the appearance and corrosion resistance of various aluminum products, including automotive trim, architectural components, consumer electronics, and decorative items.
**Specifications/Additional Details:**
1. **Tank Size:** The size of a bright anodizing tank can vary significantly based on the specific parts being processed and the production capacity of the anodizing facility. Tanks may be small for small-batch processing or large for high-volume production.
2. **Material Compatibility:** The tank material must be compatible with the anodizing electrolyte used. Polypropylene and PVC are common choices for smaller tanks, while stainless steel may be used for larger or more demanding applications.
3. **Heating and Cooling:** Bright anodizing tanks often include heating and cooling systems to control the temperature of the electrolyte solution. Maintaining a consistent temperature is crucial for achieving desired anodizing results.
4. **Agitation:** Mechanical or air-based agitation systems may be integrated into the tank to ensure uniform electrolyte distribution and improve anodizing quality.
5. **Racks and Fixtures:** Anodizing tanks may include racks and fixtures to hold the metal parts securely during the process. These fixtures are typically made from materials compatible with the anodizing solution.
6. **Electrical Controls:** Bright anodizing tanks include electrical controls for regulating the anodizing process parameters, such as voltage, current, and process time.
7. **Filtration:** Filtration systems may be incorporated to remove contaminants and impurities from the anodizing solution, ensuring consistent anodizing results.
8. **Quality Monitoring:** Some tanks may have built-in quality monitoring and control systems to ensure that the anodized parts meet specified quality and appearance standards.
9. **Waste Treatment:** Bright anodizing tanks often include provisions for waste treatment and disposal, as anodizing generates waste materials that must be managed responsibly.
10. **Safety Features:** Safety features, such as ventilation systems and emergency shutdown controls, may be included to protect workers and the environment from the potentially hazardous anodizing process.
11. **Customization:** Manufacturers of bright anodizing tanks may offer customization options to meet the specific needs and production requirements of their customers.
12. **Maintenance:** Regular maintenance and cleaning of the tank and associated equipment are essential to ensure consistent anodizing results and extend the equipment's lifespan.
13. **Cost:** The cost of a bright anodizing tank can vary significantly depending on its size, material, features, and customizations.

Color anodizing tanks are specialized containers used in the anodizing process to create a colorful and corrosion-resistant oxide layer on the surface of various metals, particularly aluminum. These tanks are designed to hold the anodizing electrolyte solution and facilitate the anodizing process. Here are some basic details, specifications, and additional information about color anodizing tanks:
**Basic Details:**
1. **Purpose:** Color anodizing tanks are specifically designed for the anodizing process, which involves creating a protective and decorative oxide layer on the surface of metal parts, often aluminum. This process can produce a range of vibrant colors on the metal's surface.
2. **Material:** These tanks are typically constructed from materials that are resistant to the anodizing electrolyte solution, which is often acidic. Common materials include polypropylene (PP), polyvinyl chloride (PVC), or other chemically resistant plastics. The choice of material depends on the type of anodizing process and chemicals used.
3. **Design:** Color anodizing tanks come in various shapes and sizes, depending on the specific application and the size of the parts being anodized. They can be rectangular, cylindrical, or customized to meet specific requirements.
4. **Applications:** These tanks are used in various industries, including automotive, aerospace, electronics, and architectural applications, where colored anodized finishes are desired for both decorative and functional purposes.
**Specifications/Additional Details:**
1. **Tank Size:** The size of the color anodizing tank can vary widely based on the requirements of the parts being anodized. Larger tanks are used for processing larger components or batches of parts.
2. **Tank Capacity:** The tank capacity is determined by its size and depth, and it defines how many parts or components can be anodized in a single batch.
3. **Temperature Control:** Some color anodizing tanks may have built-in temperature control mechanisms, such as heating elements or cooling coils, to maintain the optimal temperature of the anodizing electrolyte solution. Precise temperature control is essential for achieving consistent and desired results.
4. **Agitation:** Proper agitation of the electrolyte solution is crucial to ensure uniform anodizing. Some tanks may include provisions for mechanical or air agitation systems.
5. **Lids/Covers:** Tanks may have lids or covers to minimize evaporation and contamination of the anodizing solution. Lids can also help maintain a stable temperature inside the tank.
6. **Chemical Resistance:** The tank material should be highly resistant to the chemicals used in the anodizing process, including sulfuric acid or other anodizing electrolytes.
7. **Racking System:** Anodizing tanks may include a racking system or hooks to hold and suspend the parts within the tank during the anodizing process. The design of the racking system can vary based on the specific parts being processed.
8. **Quality Control:** Precision and consistency are essential in color anodizing, so quality control measures may be in place to monitor and ensure the desired color and finish are achieved.
9. **Waste Management:** Proper waste disposal and treatment systems may be integrated into the color anodizing tank setup to manage the disposal of chemicals and waste generated during the process.
10. **Safety Features:** Safety features, such as ventilation and chemical spill containment, are often included to ensure a safe working environment for operators.
11. **Compliance:** Ensure that the color anodizing tank and the entire anodizing process comply with industry-specific quality and safety standards, especially when working with chemicals and hazardous materials.
12. **Maintenance:** Regular maintenance and cleaning of the tank are essential to maintain its functionality and prolong its lifespan.

A hard anodizing tank is a specialized container or vessel used in the process of hard anodizing, which is an electrochemical surface treatment that creates a protective and wear-resistant oxide layer on the surface of aluminum and other metals. These tanks are designed to hold the anodizing electrolyte solution and the workpiece (usually aluminum parts) during the anodizing process. Here are some basic details, specifications, and additional information about hard anodizing tanks:
**Basic Details:**
1. **Material:** Hard anodizing tanks are typically constructed from materials that are resistant to the corrosive effects of the anodizing electrolyte. Common materials include polypropylene (PP), polyvinylidene fluoride (PVDF), or high-density polyethylene (HDPE). These materials are selected for their chemical resistance.
2. **Tank Design:** The tank is designed to hold the anodizing electrolyte solution and allow for the immersion of aluminum parts. It often includes a cathode (usually made of lead) and an anode to facilitate the anodizing process.
3. **Applications:** Hard anodizing tanks are used in industrial applications to hard coat aluminum parts, which increases their wear resistance and provides corrosion protection. Common applications include aerospace, automotive, military, and industrial components.
**Specifications/Additional Details:**
1. **Tank Size:** The size of the hard anodizing tank can vary significantly based on the size of the workpieces and the production volume. Custom sizes and configurations are available to meet specific requirements.
2. **Tank Shape:** Tanks can be rectangular, cylindrical, or customized to fit the specific needs of the anodizing process.
3. **Material Compatibility:** The tank's construction materials should be compatible with the anodizing electrolyte solution and the aluminum parts being processed.
4. **Temperature Control:** Hard anodizing processes often require precise temperature control. Some tanks are equipped with heating or cooling systems to maintain the desired temperature range.
5. **Agitation:** Agitation of the electrolyte solution is essential to ensure uniform anodizing. Some tanks include agitation systems such as air bubbling or mechanical stirrers.
6. **Cathode and Anode Design:** The tank may include cathodes and anodes made from materials that do not react with the electrolyte solution and are resistant to corrosion.
7. **Tank Lining:** Some tanks are lined with materials such as Teflon (PTFE) to provide additional protection against chemical attack.
8. **Safety Features:** Safety features such as splash guards, fume extraction systems, and emergency shut-off mechanisms may be included to ensure the safety of operators and the facility.
9. **Quality Standards:** Tanks used in industrial hard anodizing processes must meet industry-specific quality and safety standards, especially when dealing with chemicals and electrical processes.
10. **Maintenance:** Consider ease of maintenance and cleaning when selecting a hard anodizing tank. Removable lids or access ports may facilitate maintenance and part loading/unloading.
11. **Cost:** The cost of a hard anodizing tank can vary depending on its size, specifications, and customizations.

A PP (Polypropylene) anodizing tank is a specialized tank or bath used in the anodizing process for treating various metals, such as aluminum and titanium, to create a protective oxide layer on their surfaces. These tanks are constructed using polypropylene material, which offers excellent chemical resistance, making them suitable for use with corrosive anodizing solutions. 

Basic Details:

• Material: The primary construction material of a PP anodizing tank is polypropylene (PP). PP is chosen for its high chemical resistance, durability, and ability to withstand the aggressive chemical solutions used in the anodizing process.
• Purpose: PP anodizing tanks are designed to hold the anodizing electrolyte solution and submerge the metal parts or workpieces being anodized. The tank provides the controlled environment required for the anodizing process.
• Applications: These tanks are used in various industries, including aerospace, automotive, electronics, and architectural, where anodizing is employed to enhance the corrosion resistance and aesthetics of metal components.

Specifications/Additional Details:

• Size and Dimensions: The size and dimensions of PP anodizing tanks can vary widely based on the specific anodizing process requirements and the size of the workpieces being treated. Custom sizes and configurations are often available.
• Tank Design: PP anodizing tanks are typically rectangular or custom-shaped containers designed to hold the anodizing solution. They may have features such as drains, overflow ports, and access panels for maintenance.
• Material Thickness: The thickness of the polypropylene material used in the tank's construction is chosen to ensure structural integrity and resistance to chemical attack.
• Temperature Resistance: PP anodizing tanks must withstand the temperature range required for the anodizing process, which can vary depending on the type of anodizing (e.g., sulfuric acid, hard coat).
• Chemical Compatibility: Polypropylene is known for its resistance to a wide range of chemicals, including anodizing solutions, acids, and alkalis.
• Construction: The tank is typically fabricated using techniques such as hot gas welding or fusion welding to ensure that it is leak-proof and chemically resistant.
• Accessories: PP anodizing tanks may include accessories such as immersion heaters, agitation systems, and temperature control devices to maintain the desired process conditions.
• Ventilation: Adequate ventilation systems are often incorporated to control fumes generated during the anodizing process and to ensure a safe working environment.
• Quality Standards: Ensure that the PP anodizing tank meets industry-specific quality and safety standards, particularly when used in critical processes.
• Maintenance: Consider ease of maintenance, cleaning, and repair when selecting a PP anodizing tank. Access panels and drain ports can facilitate maintenance tasks.
• Cost: The cost of a PP anodizing tank can vary depending on its size, specifications, and customizations.

A phosphating tank, also known as a phosphate tank or phosphatizing tank, is a specialized industrial tank used for the process of phosphating. Phosphating is a surface treatment method that involves applying a phosphate conversion coating to a metal substrate, typically steel or iron. This coating improves corrosion resistance, paint adhesion, and overall surface quality. Here are basic details, specifications, and additional information about phosphating tanks:
**Basic Details:**
1. **Purpose:** Phosphating tanks are used for the application of a phosphate conversion coating onto metal surfaces. This coating enhances the metal's corrosion resistance and provides a suitable surface for subsequent painting or coating processes.
2. **Process:** The phosphating process typically involves a series of steps, including cleaning the metal surface, etching or activating the surface, applying the phosphate solution, rinsing, and drying. The tank plays a crucial role in holding the phosphate solution during the coating process.
**Specifications/Additional Details:**
1. **Tank Material:** Phosphating tanks are commonly made from materials like mild steel, stainless steel, or plastic (polypropylene or PVC). The choice of material depends on the compatibility with the phosphate solution used and the expected service life of the tank.
2. **Tank Design:** The tank can come in various designs, including rectangular, cylindrical, or custom shapes, depending on the size and layout of the facility. Some tanks may have integral heating and agitation systems to optimize the phosphating process.
3. **Tank Size:** The size of the phosphating tank is determined by the size of the parts or components to be phosphated. Tanks can range from small laboratory-scale tanks to large industrial tanks capable of handling large workpieces.
4. **Phosphate Solution:** Different phosphating processes may use various types of phosphate solutions, such as zinc phosphate, iron phosphate, or manganese phosphate, depending on the specific requirements of the application.
5. **Heating System:** In many cases, phosphating tanks are equipped with a heating system to maintain the phosphate solution at the optimal temperature for the phosphating process. Heating methods can include electric heaters, steam coils, or gas-fired heaters.
6. **Agitation:** Agitation systems are used to ensure uniform distribution of the phosphate solution and to prevent settling or stratification of chemicals within the tank. Agitation can be achieved through mechanical stirrers or air bubbling.
7. **Filtration:** Some phosphating tanks include filtration systems to remove contaminants and particulates from the phosphate solution, ensuring consistent and high-quality coatings.
8. **Tank Lid or Cover:** A tank may have a lid or cover to prevent contamination and evaporation of the phosphate solution. Lids may be removable or hinged for easy access to the tank.
9. **Safety Features:** Safety features such as overflow protection, emergency shut-off systems, and ventilation may be incorporated into the tank design to ensure safe operation.
10. **Quality Control:** Monitoring and control systems are often used to maintain the pH levels, temperature, and chemical concentrations within the tank to ensure consistent and reliable phosphating results.
11. **Maintenance:** Regular maintenance of phosphating tanks is essential to prevent contamination, corrosion, and ensure the longevity of the equipment.
12. **Cost:** The cost of a phosphating tank can vary significantly depending on its size, material, design, and features.

A PP (Polypropylene) storage tank is a type of industrial storage vessel designed to store a wide range of chemicals, including corrosive and hazardous substances. These tanks are made of polypropylene, a thermoplastic known for its excellent chemical resistance and durability. 

Basic Details:

• Material: The primary construction material for PP storage tanks is polypropylene (PP). This material is chosen for its exceptional chemical resistance, making it suitable for storing a wide range of corrosive and hazardous chemicals.
• Tank Type: PP storage tanks come in various types, including vertical tanks, horizontal tanks, cone-bottom tanks, and cylindrical tanks, each designed to meet specific storage requirements.
• Applications: PP storage tanks are used in a variety of industrial applications, including chemical processing, water treatment, wastewater management, plating, and many others that require safe storage of corrosive liquids.

Specifications/Additional Details:

• Capacity: The capacity of PP storage tanks can vary widely, ranging from a few liters or gallons to several thousand liters or gallons. The tank's capacity should be selected based on the specific storage needs of the application.
• Design Pressure: Some PP storage tanks may be designed to withstand a certain pressure, especially if they are used for applications involving pressurized chemicals. The design pressure should match the application requirements.
• Temperature Range: PP storage tanks can typically handle a wide range of temperatures, but it's essential to verify that the tank can safely accommodate the temperature variations encountered in the application.
• Fittings and Accessories: PP storage tanks may include various fittings and accessories, such as threaded openings, manways, level indicators, vents, and overflow ports, to facilitate filling, emptying, and monitoring.
• Reinforcement: Depending on the tank's size and application, it may include structural reinforcement features like ribs or supports to ensure stability and structural integrity.
• Lining: Some PP storage tanks may have additional linings or coatings to enhance chemical resistance, depending on the specific chemicals being stored.
• Quality Standards: Ensure that the PP storage tank meets industry-specific quality and safety standards, particularly when used for storing hazardous chemicals.
• Customization: Manufacturers often offer customization options for PP storage tanks, allowing you to specify dimensions, fittings, and accessories to meet your specific storage needs.
• Installation: Consider installation requirements, including the need for a concrete pad, support structure, or anchoring, depending on the tank's size and location.
• Maintenance: PP storage tanks are generally low-maintenance, but regular inspection and cleaning are essential to ensure long-term reliability and chemical resistance.
• Cost: The cost of a PP storage tank can vary significantly based on its size, specifications, and customizations.

A PP-FRP tank, also known as a Polypropylene-Fiberglass Reinforced Plastic tank, is a type of storage tank commonly used in various industrial applications. These tanks are designed to provide excellent resistance to corrosion, making them suitable for storing and transporting a wide range of chemicals and fluids. 

Basic Details:

• Material Composition: PP-FRP tanks are typically constructed using a combination of polypropylene (PP) and fiberglass reinforced plastic (FRP) materials. The outer layer consists of FRP, which provides structural strength, while the inner layer is made of PP for chemical resistance.
• Applications: PP-FRP tanks are used in industries such as chemical processing, water treatment, wastewater management, and more, where the storage and transportation of corrosive or hazardous fluids are required.

Specifications/Additional Details:

• Tank Capacity: PP-FRP tanks are available in various sizes and capacities, ranging from small storage tanks to large vessels capable of holding thousands of gallons of liquid.
• Design: These tanks can have different designs, including cylindrical, rectangular, or custom shapes, depending on the specific application's requirements.
• Reinforcement: The FRP layer provides structural reinforcement, ensuring the tank's integrity and resistance to external forces, such as wind or seismic activity.
• Chemical Resistance: PP-FRP tanks are known for their excellent chemical resistance to a wide range of acids, bases, and corrosive chemicals. The choice of materials and resin type can be customized to match the specific chemicals being stored.
• Temperature Resistance: The tank's design and material selection should consider the temperature range of the stored fluids, as PP-FRP tanks can withstand a range of temperatures, but limits may apply.
• Fittings and Accessories: Tanks can be customized with various fittings, valves, and accessories to suit the specific application, including inlet/outlet connections, level indicators, vents, and more.
• Installation: PP-FRP tanks can be installed above ground or buried underground, depending on the application and space availability.
• Quality Standards: Ensure that the tank meets industry-specific quality and safety standards, particularly when used for storing hazardous chemicals.
• Maintenance: PP-FRP tanks typically require minimal maintenance. Periodic inspections and cleaning may be necessary to ensure the tank's longevity and performance.
• Cost: The cost of a PP-FRP tank depends on factors such as size, capacity, design, and customization options.
• Warranty: Check if the manufacturer offers warranties or guarantees for the tank's performance and durability.

A lead lining pickling tank is a specialized industrial tank used for the pickling process, which involves removing impurities, scales, or oxides from metal surfaces. These tanks are lined with lead to provide corrosion resistance and chemical compatibility, making them suitable for handling corrosive pickling solutions. 

Basic Details:

• Lining Material: The primary material used for lining pickling tanks is lead (Pb). Lead is chosen for its excellent resistance to a wide range of corrosive chemicals, including acids used in pickling processes.
• Construction: Lead lining is typically applied to the interior surface of the tank. The tank itself is often constructed from materials such as mild steel or stainless steel, which provide structural support.
• Applications: Lead lining pickling tanks are used in industries such as metal fabrication, steel manufacturing, and electroplating, where the removal of scale and impurities from metal surfaces is necessary.

Specifications/Additional Details:

• Tank Size and Dimensions: The size and dimensions of lead lining pickling tanks can vary widely based on the specific application's requirements. Custom sizes and configurations may also be available.
• Lead Thickness: The thickness of the lead lining is specified based on the concentration and type of acid or pickling solution used. Thicker lead linings offer greater chemical resistance.
• Tank Shape: These tanks can come in various shapes, including rectangular, cylindrical, or custom designs, depending on the specific needs of the pickling process.
• Overflow and Drainage: Pickling tanks may have provisions for overflow and drainage to ensure proper circulation and disposal of the pickling solution.
• Tank Accessories: Depending on the application, lead lining pickling tanks may include accessories such as agitators, heaters, temperature sensors, and monitoring systems to control the pickling process.
• Chemical Compatibility: Lead lining provides excellent resistance to a wide range of chemicals, including sulfuric acid, hydrochloric acid, and nitric acid, which are commonly used in pickling processes.
• Temperature Range: The tank should be designed to withstand the temperatures associated with the pickling process, which can vary depending on the type of acid and the specific application.
• Safety Measures: Due to the potential hazards associated with handling corrosive chemicals, lead lining pickling tanks may include safety features such as fume extraction systems and protective coatings to prevent lead contamination.
• Quality Standards: Ensure that the tank and lead lining meet industry-specific quality and safety standards, particularly when used in critical or hazardous environments.
• Maintenance: Consider ease of maintenance, cleaning, and inspection of the lead lining pickling tank to ensure its longevity and efficient operation.
• Cost: The cost of lead lining pickling tanks can vary depending on their size, specifications, and customizations.

A Polypropylene (PP) tank, often referred to as a PP tank, is a container or vessel made from polypropylene, a thermoplastic polymer known for its excellent chemical resistance. These tanks are widely used in various industrial applications, especially for storing or processing corrosive or aggressive chemicals. 

Basic Details:

• Material: PP tanks are constructed entirely from polypropylene, a versatile and chemically resistant thermoplastic material. Polypropylene is chosen for its corrosion resistance, durability, and cost-effectiveness.
• Applications: PP tanks are used in a wide range of industries, including chemical processing, wastewater treatment, plating, semiconductor manufacturing, pharmaceuticals, and more. They are designed to store, mix, or process corrosive and hazardous chemicals.

Specifications/Additional Details:

• Tank Size and Dimensions: PP tanks come in various sizes and shapes, including cylindrical, rectangular, or custom designs. The size and dimensions are tailored to meet the specific needs of the application.
• Capacity: The tank's capacity is typically specified in liters or gallons, indicating the volume it can hold.
• Wall Thickness: The thickness of the tank walls can vary based on the tank's size and intended use. Thicker walls provide added strength and resistance to mechanical stress.
• Tank Configuration: PP tanks can be designed with features such as conical bottoms, sloped bottoms, flat bottoms, or dished bottoms, depending on the application and the need for easy drainage or mixing.
• Fittings and Accessories: Tanks may include various fittings and accessories, such as threaded ports, flanges, manholes, ladders, agitators, and access hatches, to facilitate their functionality and integration into industrial processes.
• Chemical Compatibility: Polypropylene is known for its resistance to a wide range of chemicals, including acids, bases, and solvents. Ensure compatibility with the specific chemicals being stored or processed.
• Temperature Range: PP tanks can typically handle temperatures within a specific range, but it's essential to check that the tank's material is suitable for the intended temperature conditions.
• UV Resistance: Some PP tanks may be designed with UV resistance for outdoor use to protect against degradation from exposure to sunlight.
• Design Standards: Ensure that the tank meets industry-specific design and safety standards, such as ASTM, ANSI, or other relevant regulations.
• Customization: Manufacturers often offer customization options, allowing you to specify additional features, such as reinforced walls, insulation, or specialized linings, to meet specific requirements.
• Quality Standards: Verify that the PP tank is manufactured and inspected to meet quality standards, and inquire about warranty and maintenance support.
• Installation: Consider the installation process and requirements, including the need for anchoring, support structures, and safety measures.
• Cost: The cost of a PP tank can vary significantly based on its size, specifications, and customizations. Consider both the initial cost and the long-term cost of ownership.

A PP-FRP acid storage tank is a specialized container used for the safe storage of corrosive acids, chemicals, or other hazardous substances. It is constructed using a combination of materials, including polypropylene (PP) and fiberglass reinforced plastic (FRP), to provide excellent corrosion resistance and durability.

Basic Details:

• Materials Used: 

- Polypropylene (PP): The inner lining of the tank is typically made of polypropylene, which provides excellent resistance to a wide range of corrosive chemicals, including acids and bases. 
 - Fiberglass Reinforced Plastic (FRP): The outer layer of the tank is constructed from fiberglass reinforced plastic to provide structural strength and additional protection against mechanical damage.

• Applications: PP-FRP acid storage tanks are used in various industries, including chemical processing, water treatment, metal finishing, and other applications where the storage of corrosive substances is required.

Specifications/Additional Details:

• Tank Capacity: The tank's capacity can vary widely, ranging from a few hundred liters to tens of thousands of liters, depending on the specific storage needs of the application.
• Design: PP-FRP acid storage tanks are typically cylindrical in shape, but they can also be customized to fit specific space requirements. They may have conical or flat bottoms, depending on the intended use.
• Chemical Compatibility: These tanks are designed to be compatible with a wide range of corrosive chemicals, including strong acids, bases, and solvents. It's essential to specify the types of chemicals the tank will store to ensure proper material selection.
• Temperature Range: The tank's design and materials should be suitable for the temperature range of the stored chemicals. Some applications involve elevated or low temperatures, which must be considered during tank selection.
• Ventilation and Safety Features: Proper ventilation and safety features, such as pressure relief valves and emergency drains, may be incorporated into the tank design to ensure safe storage and handling of chemicals.
• Fittings and Accessories: The tank may include various fittings, such as inlet and outlet ports, overflow ports, and level indicators. The choice of fittings depends on the specific application's requirements.
• Reinforcement: FRP layers provide structural reinforcement to the tank, ensuring its stability and preventing deformation.
• Quality Standards: Ensure that the PP-FRP acid storage tank meets industry-specific quality and safety standards, especially when storing hazardous chemicals.
• Customization: Manufacturers often offer customization options for tank size, shape, and additional features to meet specific storage needs.
• Installation and Maintenance: Proper installation and routine maintenance are crucial to ensure the tank's long-term reliability and safety.
• Cost: The cost of a PP-FRP acid storage tank can vary significantly depending on its size, specifications, and customizations.

A PP-FRP (Polypropylene-Fiberglass Reinforced Plastic) storage tank is a type of industrial storage container used for storing various liquids, chemicals, and corrosive substances. It is constructed using a combination of polypropylene and fiberglass-reinforced plastic to provide excellent chemical resistance and structural strength. 

Basic Details:

• Materials: PP-FRP storage tanks are typically constructed with a combination of polypropylene and fiberglass-reinforced plastic. Polypropylene provides chemical resistance, while the fiberglass reinforcement enhances structural strength.
• Construction: These tanks are typically fabricated using a filament winding process, where layers of fiberglass-reinforced plastic are applied to create a strong and corrosion-resistant shell.
• Applications: PP-FRP storage tanks are used in various industrial applications, including chemical processing, water treatment, wastewater management, and the storage of corrosive or hazardous substances.

Specifications/Additional Details:

• Capacity: The storage tank's capacity can vary widely, ranging from small containers to large tanks with capacities measured in thousands of gallons or liters. The choice of capacity depends on the specific application.
• Shape: PP-FRP storage tanks come in various shapes, including cylindrical, rectangular, and custom shapes, depending on the intended use and space constraints.
• Wall Thickness: The thickness of the tank's walls is designed to meet the required structural and chemical resistance specifications. Thicker walls are often used for larger tanks or when handling particularly corrosive substances.
• Chemical Resistance: PP-FRP is chosen for its excellent chemical resistance, making it suitable for storing a wide range of corrosive substances, acids, bases, and chemicals. Compatibility with specific chemicals should be confirmed before use.
• Temperature Resistance: PP-FRP tanks can withstand a range of temperatures, but the specific temperature limits should be verified to ensure they meet the requirements of the stored materials.
• Fittings and Accessories: Tanks can be equipped with various fittings and accessories, including vents, nozzles, manholes, level indicators, and drain valves, to suit the specific storage and processing needs.
• Reinforcement: The fiberglass reinforcement in the tank provides structural integrity and strength, ensuring the tank can withstand both internal and external pressures.
• Coatings: Some PP-FRP tanks may have specialized coatings or linings for added chemical resistance or to meet specific regulatory requirements.
• Customization: Manufacturers often offer customization options to tailor the tank's specifications, such as size, shape, and accessories, to meet the specific needs of the application.
• Quality Standards: Ensure that the PP-FRP storage tank meets industry-specific quality and safety standards, particularly when used for storing hazardous materials.
• Installation: Proper installation and foundation considerations are essential to ensure the tank's stability and longevity.
• Maintenance: PP-FRP tanks generally require minimal maintenance due to their corrosion-resistant properties, but regular inspections and cleaning may be necessary.
• Cost: The cost of a PP-FRP storage tank can vary significantly based on its size, specifications, and customizations.

An electropolishing tank is a specialized container or vessel used in the electropolishing process, which is an electrochemical surface finishing technique. Electropolishing is commonly employed to improve the surface finish, cleanliness, and corrosion resistance of metal parts. Here are basic details, specifications, and additional information about electropolishing tanks:
**Basic Details:**
1. **Purpose:** Electropolishing tanks are designed for the immersion and treatment of metal parts in an electrolytic solution. The tank facilitates the electropolishing process by providing a controlled environment for the removal of surface imperfections and the enhancement of the metal's appearance and performance.
2. **Construction Material:** Electropolishing tanks are typically constructed from materials that are resistant to the corrosive nature of the electropolishing electrolyte. Common materials include stainless steel, polypropylene (PP), and other chemically resistant plastics or coatings.
3. **Applications:** Electropolishing tanks are used in industries such as aerospace, medical devices, pharmaceuticals, and automotive, where the improvement of metal part surfaces is essential for functionality, appearance, or cleanliness.
**Specifications/Additional Details:**
1. **Tank Size and Shape:** The size and shape of electropolishing tanks can vary significantly depending on the size of the metal parts being treated and the specific electropolishing process. Custom tank sizes and shapes may be available to accommodate specific requirements.
2. **Material Compatibility:** The tank's construction material should be compatible with the electropolishing electrolyte used and resistant to chemical corrosion.
3. **Tank Linings:** Some electropolishing tanks have inner linings made of materials such as Teflon or PVC to enhance chemical resistance and prevent contamination.
4. **Temperature Control:** Temperature control systems, such as heaters and coolers, may be integrated into the tank to maintain the optimal temperature for the electropolishing process.
5. **Circulation:** Tanks may include circulation systems to ensure uniform distribution of the electrolyte and maintain consistent electropolishing conditions.
6. **Agitation:** Agitation systems, such as pumps or stirrers, may be used to keep the electrolyte in motion and promote even material removal during electropolishing.
7. **Electrolyte Management:** Electropolishing tanks may include features for managing the electrolyte solution, such as filtration systems to remove contaminants.
8. **Control Panels:** Some electropolishing tanks have integrated control panels for adjusting process parameters such as voltage, current, and temperature.
9. **Safety Features:** Safety features, such as over-temperature protection and leak detection, are essential to ensure safe operation during the electropolishing process.
10. **Customization:** Manufacturers may offer customization options for electropolishing tanks to meet specific process requirements, including tank size, temperature control, and material compatibility.
11. **Quality Standards:** Ensure that the electropolishing tank meets industry-specific quality and safety standards, especially when used in critical applications.
12. **Maintenance:** Consider ease of maintenance and cleaning, as electropolishing tanks need periodic cleaning and maintenance to ensure consistent performance.
13. **Cost:** The cost of an electropolishing tank can vary significantly based on its size, specifications, and customizations.

A gold plating tank, also known as a electroplating tank or a plating bath, is a specialized container used in the electroplating process to deposit a layer of gold onto the surface of an object. These tanks are designed to provide a controlled and consistent environment for the electroplating process. 

Basic Details:

• Purpose: Gold plating tanks are used for electroplating objects with a layer of gold to enhance their appearance, provide corrosion resistance, or improve electrical conductivity.
• Construction Material: These tanks are typically constructed from materials that are resistant to the corrosive nature of the electroplating chemicals, such as polypropylene, PVC, or stainless steel.
• Applications: Gold plating tanks are used in various industries, including jewelry manufacturing, electronics, aerospace, and decorative finishing.

Specifications/Additional Details:

• Tank Size: The size of a gold plating tank can vary widely depending on the size of the objects being plated and the specific requirements of the electroplating process. Custom sizes are often available.
• Tank Shape: Gold plating tanks can be rectangular, square, or cylindrical, depending on the specific requirements and space available.
• Tank Lining: The interior of the tank is often lined or coated with materials that are resistant to the electroplating chemicals to prevent contamination and ensure longevity.
• Temperature Control: Many gold plating tanks have heating and cooling systems to control the temperature of the electroplating solution, as temperature can affect the plating quality.
• Agitation: Agitation systems, such as air or mechanical agitation, may be included to ensure uniform distribution of the plating solution and consistent plating results.
• Filtration: Some tanks are equipped with filtration systems to remove impurities and particles from the plating solution, which can affect the quality of the plating.
• Anode Arrangement: Gold plating tanks typically have a specific arrangement of anodes made of gold or other materials to provide a source of gold ions for the plating process.
• Control Systems: Modern gold plating tanks often come with electronic control systems that allow for precise control of plating parameters, such as voltage, current, and plating time.
• Exhaust and Ventilation: Adequate ventilation and exhaust systems are essential to remove fumes and gases generated during the electroplating process, ensuring a safe working environment.
• Safety Features: Safety features such as leak detection, emergency shutdown systems, and protective measures to prevent contact with hazardous chemicals should be considered.
• Compliance: Ensure that the gold plating tank complies with relevant safety and environmental regulations, including waste disposal requirements for used plating solutions.
• Maintenance: Regular maintenance is necessary to keep the tank and associated equipment in proper working condition and to ensure the quality of the plated objects.
• Cost: The cost of a gold plating tank can vary significantly based on its size, specifications, and the included features.

A PVC lining tank is a type of industrial storage or process tank that is lined with polyvinyl chloride (PVC) material. PVC lining is chosen for its chemical resistance and suitability for storing or processing a wide range of corrosive liquids and chemicals. 

Basic Details:

• Lining Material: The primary material used in a PVC lining tank is polyvinyl chloride (PVC). PVC is known for its excellent chemical resistance, making it suitable for storing and processing corrosive chemicals.
• Tank Type: PVC lining is typically applied to the interior surface of tanks made from other materials, such as steel, concrete, or fiberglass. The underlying tank provides structural support, while the PVC lining provides chemical resistance.
• Applications: PVC lining tanks are used in various industrial applications, including chemical storage, wastewater treatment, electroplating, pickling, and many other processes involving corrosive chemicals.

Specifications/Additional Details:

• Tank Material: The underlying tank is typically made of a material that provides structural support and durability, such as steel, concrete, or fiberglass. The material choice depends on the specific application's requirements.
• Lining Thickness: The thickness of the PVC lining can vary based on the type of chemicals being stored or processed and the desired level of chemical resistance. Thicker linings provide increased protection.
• Lining Application: PVC lining is applied to the interior of the tank through a specialized process, ensuring proper adhesion and coverage of all interior surfaces. The lining is often fabricated off-site and then installed in the tank.
• Tank Design: PVC lining tanks come in various shapes and sizes, including cylindrical, rectangular, and custom-designed configurations, depending on the specific application's needs.
• Fittings and Accessories: PVC lining tanks can include various fittings, such as inlet and outlet connections, access hatches, agitators, and level indicators, to facilitate the intended use.
• Temperature Resistance: PVC lining provides resistance to a wide range of temperatures, but it's essential to ensure that the lining material can withstand the temperature variations in the specific application.
• Chemical Compatibility: PVC lining is highly resistant to a wide range of chemicals, but it's essential to verify compatibility with the specific chemicals being stored or processed.
• Lining Quality Standards: Ensure that the PVC lining meets industry-specific quality and safety standards, particularly when used for storing or processing hazardous chemicals.
• Maintenance: PVC lining tanks generally require minimal maintenance, but regular inspections and cleaning may be necessary to ensure long-term performance.
• Cost: The cost of a PVC lining tank can vary depending on factors such as size, material of the underlying tank, lining thickness, and customization requirements.

A PP-FRP (Polypropylene-Fiberglass Reinforced Plastic) chemical storage tank is a specialized vessel used for the safe storage of various corrosive and hazardous chemicals. These tanks are constructed using a combination of polypropylene and fiberglass reinforced plastic materials to provide excellent resistance to chemical corrosion. 

Basic Details:

• Construction Materials: PP-FRP chemical storage tanks are typically constructed using a dual-material design:   - **Polypropylene (PP):** Used for the interior lining or inner layer of the tank, polypropylene provides exceptional chemical resistance to a wide range of corrosive substances.   - **Fiberglass Reinforced Plastic (FRP):** The outer layer or structural layer of the tank is made from fiberglass reinforced plastic, providing structural integrity and additional protection.
• Applications: PP-FRP chemical storage tanks are commonly used in industries such as chemical processing, water treatment, petrochemicals, pharmaceuticals, and wastewater management for the safe storage of acids, bases, solvents, and other corrosive chemicals.

Specifications/Additional Details:

• Tank Capacity: The capacity of PP-FRP chemical storage tanks can vary widely, ranging from small tanks with a few hundred liters of capacity to large tanks with several thousand liters or more.
• Design: These tanks can come in various shapes and designs, including vertical cylindrical, horizontal cylindrical, and rectangular. The design is often chosen based on space availability and specific application requirements.
• Chemical Compatibility: PP-FRP tanks are designed to be highly resistant to a wide range of chemicals, including acids, alkalis, solvents, and various corrosive substances. It is essential to verify compatibility with the specific chemicals stored in the tank.
• Temperature Resistance: The tank's material design ensures it can withstand the temperature range required for the chemical storage process, whether it involves cryogenic, ambient, or elevated temperatures.
• Tank Fittings: Tanks may include various fittings and accessories, such as manways, nozzles, vents, and drain valves, depending on the specific application requirements.
• Pressure Rating: The tanks are designed to handle the pressure generated by the stored chemicals. Pressure ratings are specified based on the application's needs.
• UV Resistance: For outdoor installations, UV-resistant coatings or materials may be added to protect the tank from the effects of sunlight.
• Ventilation and Safety Features: Safety features such as pressure relief valves, level indicators, and overfill prevention systems may be integrated into the tank design.
• Quality Standards: Ensure that the PP-FRP chemical storage tank complies with industry-specific quality and safety standards, such as ASTM D3299 or ASME RTP-1, to guarantee its integrity and safety.
• Maintenance: Consider ease of maintenance, inspection, and cleaning when selecting a tank. Access ports and manways are essential for these purposes.
• Customization: Manufacturers often offer customization options for tank size, design, and fittings to meet specific application requirements.
• Cost: The cost of a PP-FRP chemical storage tank varies depending on its size, specifications, and customizations.

A lead bonding tank is a specialized piece of equipment used in the electronics manufacturing industry for the process of wire bonding. This process involves attaching fine wires (typically made of materials like gold or aluminum) to semiconductor devices, integrated circuits (ICs), or other electronic components. Lead bonding tanks are designed to create a controlled environment for wire bonding operations. 

Basic Details:

• Purpose: Lead bonding tanks are used to create a controlled environment with a specific atmosphere, temperature, and humidity to facilitate the wire bonding process.
• Wire Bonding Process: Wire bonding is a critical step in semiconductor manufacturing, where fine wires are bonded to the surface of semiconductor chips or packages to establish electrical connections.
• Materials: Lead bonding tanks are typically made of materials that are non-reactive and provide excellent sealing to maintain the desired atmosphere. Stainless steel or other suitable materials are often used for tank construction.

Specifications/Additional Details:

• Size and Dimensions: The size and dimensions of lead bonding tanks can vary widely depending on the specific application and the type of wire bonding equipment used. They are often customized to fit the wire bonding system's requirements.
• Atmosphere Control: These tanks are equipped with atmosphere control systems that can regulate the levels of gases such as nitrogen and hydrogen. The atmosphere is carefully controlled to minimize oxidation during the bonding process.
• Temperature Control: Lead bonding tanks include temperature control systems to maintain the appropriate temperature for the wire bonding process. Precise temperature control is critical for ensuring the quality of wire bonds.
• Humidity Control: Some applications may require humidity control within the tank to prevent static discharge and enhance wire bonding performance.
• Sealing Mechanism: A reliable sealing mechanism is crucial to maintain the controlled atmosphere inside the tank. Vacuum seals, gaskets, or O-rings are commonly used for this purpose.
• Gas Supply: Lead bonding tanks are typically connected to gas supplies, such as nitrogen or hydrogen, to create the desired atmosphere. Gas flow rates and purity levels are carefully monitored and controlled.
• Monitoring and Control Systems: These tanks may have integrated monitoring and control systems to ensure that the environment inside the tank remains within specified parameters. This includes sensors for temperature, humidity, gas concentration, and pressure.
• Safety Systems: Safety features, such as gas leak detectors and emergency shutdown mechanisms, are often incorporated to ensure the safety of operators and equipment.
• Customization: Lead bonding tanks are often customized to match specific wire bonding equipment and process requirements. Customization may involve adapting the tank's size, shape, and control systems.
• Quality Standards: Lead bonding tanks used in semiconductor manufacturing must adhere to industry-specific quality and safety standards, including those related to cleanroom environments.
• Maintenance: Regular maintenance and calibration are essential to ensure the tank's continued reliability and performance.
• Cost: The cost of lead bonding tanks can vary significantly based on their size, features, and customization.

We manufacture and supply premium-quality Water Rinse Tanks designed for efficient rinsing and cleaning processes in various industrial and laboratory applications. Made from high-grade chemical-resistant materials like PP, HDPE, or PVC, our rinse tanks offer durability, leak-proof performance, and excellent corrosion resistance. These tanks are ideal for use in electroplating, surface treatment, and laboratory washing processes.

Key Features:

• ✔️ Made from high-strength, chemical-resistant material

• ✔️ Leak-proof and rust-free construction

• ✔️ Lightweight and easy to handle

• ✔️ Smooth internal surface for easy cleaning

• ✔️ Custom sizes and fittings available

• ✔️ Long service life with minimal maintenance

Applications:

• Electroplating and surface treatment industries

• Chemical rinsing operations

• Laboratory cleaning stations

• Industrial component washing

• Water treatment setups

We manufacture and supply premium-quality Water Rinse Tanks designed for efficient rinsing and cleaning processes in various industrial and laboratory applications. Made from high-grade chemical-resistant materials like PP, HDPE, or PVC, our rinse tanks offer durability, leak-proof performance, and excellent corrosion resistance. These tanks are ideal for use in electroplating, surface treatment, and laboratory washing processes.

Key Features:

• ✔️ Made from high-strength, chemical-resistant material

• ✔️ Leak-proof and rust-free construction

• ✔️ Lightweight and easy to handle

• ✔️ Smooth internal surface for easy cleaning

• ✔️ Custom sizes and fittings available

• ✔️ Long service life with minimal maintenance

Applications:

• Electroplating and surface treatment industries

• Chemical rinsing operations

• Laboratory cleaning stations

• Industrial component washing

• Water treatment setups

A PP FRP (Polypropylene Fiber Reinforced Plastic) conical bottom tank is a type of storage tank commonly used in industrial and chemical processing applications. These tanks are designed to store and handle a variety of liquids, including corrosive or hazardous chemicals. The conical bottom design allows for easy draining and cleaning. 

Basic Details:

• Material: PP FRP tanks are constructed using a combination of polypropylene (PP) and fiberglass-reinforced plastic (FRP) materials. This combination offers excellent chemical resistance and structural integrity.
• Conical Bottom Design: The tank features a conical or sloped bottom, which allows for complete drainage of liquids and facilitates easy cleaning of the tank.
• Applications: PP FRP conical bottom tanks are used in a wide range of industries, including chemical processing, water treatment, food and beverage, and more, where the storage of corrosive or hazardous liquids is required.

Specifications/Additional Details:

• Size and Capacity: These tanks come in various sizes and capacities, ranging from small to large, depending on the specific application's requirements.
• Construction: PP FRP tanks are typically constructed using a dual-laminate process, where a layer of polypropylene is reinforced with fiberglass on the inside and outside of the tank to provide both chemical resistance and structural strength.
• Conical Angle: The angle of the conical bottom can vary based on the tank's design and intended use. Common angles include 45 degrees and 60 degrees.
• Top Configuration: The tank may have different top configurations, including an open top, closed top with a manhole for access, or a flat top with various fittings for connections.
• Fittings and Accessories: These tanks can be equipped with various fittings and accessories, including inlet/outlet connections, venting systems, level indicators, agitators, and more, depending on the application requirements.
• Temperature Resistance: PP FRP tanks can withstand a wide range of temperatures, but the specific temperature range should be checked to ensure it meets the requirements of the stored liquids.
• Chemical Compatibility: The polypropylene component of the tank provides excellent resistance to a wide range of chemicals. Ensure compatibility with the specific liquids being stored.
• Pressure Rating: The tank should be designed to withstand the internal and external pressures associated with the stored liquids and the tank's height.
• Quality Standards: Ensure that the tank meets industry-specific quality and safety standards, particularly when used for storing hazardous or corrosive substances.
• Installation and Support: Consider the tank's installation requirements and whether it needs additional support structures, such as a stand or a base.
• Customization: Manufacturers often offer customization options for PP FRP conical bottom tanks, allowing you to specify dimensions, fittings, and additional features to meet your specific storage needs.
• Maintenance: Proper maintenance practices, including routine inspections and cleaning, are essential for ensuring the longevity and safety of the tank.
• Cost: The cost of a PP FRP conical bottom tank can vary depending on its size, specifications, and customizations.

We offer high-quality Polypropylene (PP) Trays that are ideal for a wide range of industrial, laboratory, and commercial applications. Made from premium-grade polypropylene, these trays are known for their excellent chemical resistance, lightweight design, and durability.

Key Features:

• Material: Virgin Polypropylene (PP)

• Size/Shape: Available in various sizes and customizable shapes

• Color: White, Grey, or as per requirement

• Temperature Resistance: Up to 120°C

• Leak-proof & Non-reactive

• Smooth Finish for Easy Cleaning

• Reusable and Eco-Friendly

Applications:

• Chemical and pharmaceutical industries

• Laboratory use for sample handling

• Electroplating and metal treatment

• Food processing units

• Storage and transportation of parts or tools

Advantages:

• High impact strength

• Lightweight and easy to handle

• Resistant to most acids, alkalis, and solvents

• Long service life